FAG Cylindrical roller Bearings - NJ2318-E-XL-TVP2 + HJ2318-E
| da: |
111.125 mm |
| Da: |
230 mm |
| Ca: |
73.812 mm |
| A1: |
130.175 mm |
| A2: |
279.4 mm |
| S: |
4.763 mm |
| ba: |
57.944 mm |
| H: |
292.1 mm |
| PDF |
|
Product Details
| da |
111.125 mm |
| Da |
230 mm |
| Ca |
73.812 mm |
| A1 |
130.175 mm |
| A2 |
279.4 mm |
| S |
4.763 mm |
| ba |
57.944 mm |
| H |
292.1 mm |
| H1 |
152.4 mm |
| H2 |
60.325 mm |
| L |
466.725 mm |
| R1 |
79.375 mm |
| R2 |
36.513 mm |
| RG |
1/2 NPT |
| PG |
1/4 NPT |
| h |
60.325 mm |
| Housing |
SSAFS 526 |
| Stabilizing ring |
SR-26-0 |
| Taconite seal |
TER 116 |
| End plug (suffix Y) |
EPR 15 |
| Max. speed for Taconite seal |
700 r/min |
| P60° |
308 kN |
| P90° |
185 kN |
| P120° |
125 kN |
| P150° |
118 kN |
| P180° |
151 kN |
| Pa |
24.9 kN |
| Mass pillow block |
85.7 kg |
| Cap bolt |
3/4-10 UNC |
| Cap bolt recommended tightening torque |
515.2 N·m |
| Cap bolt, SAE grade |
8 |
| Eye bolt |
2 x 3/8-16 UNC |
| Initial grease fill |
382.73 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |