NTN NUP210U Roller Bearings
| da: |
190.5 mm |
| Da: |
399.999 mm |
| Ca: |
117.805 mm |
| A1: |
222.25 mm |
| A2: |
368.3 mm |
| S: |
4.763 mm |
| ba: |
90.487 mm |
| H: |
474.663 mm |
Product Details
| da |
190.5 mm |
| Da |
399.999 mm |
| Ca |
117.805 mm |
| A1 |
222.25 mm |
| A2 |
368.3 mm |
| S |
4.763 mm |
| ba |
90.487 mm |
| H |
474.663 mm |
| H1 |
241.3 mm |
| H2 |
95.25 mm |
| J min. |
628.65 mm |
| J max. |
708.025 mm |
| J1 |
133.35 mm |
| L |
831.85 mm |
| N1 |
41.275 mm |
| R1 |
130.175 mm |
| R2 |
46.831 mm |
| RG |
1 NPT |
| PG |
1/4 NPT |
| h |
79.375 mm |
| Housing |
SAF 544 |
| Adapter sleeve assembly |
SNW 44x7.1/2 |
| Stabilizing ring |
SR-44-38 |
| Taconite seal |
TER 584 |
| End plug (suffix Y) |
EPR 23 |
| Max. speed for Taconite seal |
385 r/min |
| P60° |
423 kN |
| P90° |
254 kN |
| P120° |
160 kN |
| P150° |
145 kN |
| P180° |
173 kN |
| Pa |
71.2 kN |
| Mass pillow block |
262 kg |
| Cap bolt |
4 x 1-8 UNC |
| Cap bolt recommended tightening torque |
400 N·m |
| Cap bolt, SAE grade |
5 |
| Eye bolt |
2 x 1/2-13 UNC |
| Appropriate attachment bolt size G |
1.5 in |
| Initial grease fill |
2749.95 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |