INA IR75X85X25-EGS Roller Bearings
| Bearing number: |
TU 3/4 TF |
| Size (mm): |
19.05x34x13.5 |
| Bore Diameter (mm): |
19,05 |
| Outer Diameter (mm): |
34 |
| Width (mm): |
13,5 |
| d: |
19.05 mm |
| A: |
34 mm |
| A1: |
13.5 mm |
Product Details
| Bearing number |
TU 3/4 TF |
| Size (mm) |
19.05x34x13.5 |
| Bore Diameter (mm) |
19,05 |
| Outer Diameter (mm) |
34 |
| Width (mm) |
13,5 |
| d |
19.05 mm |
| A |
34 mm |
| A1 |
13.5 mm |
| A2 |
25 mm |
| A5 |
18.5 mm |
| B |
31 mm |
| H |
19 mm |
| H1 |
76 mm |
| H2 |
54 mm |
| L |
97 mm |
| L1 |
62 mm |
| L2 |
10 mm |
| L3 |
54 mm |
| N1 |
16 mm |
| N2 |
32 mm |
| s1 |
18.3 mm |
| DN |
6.5 mm |
| SWN |
7 mm |
| GN - 1/4-28 SAE-LT |
1/428 SAELT |
| RG - 1/4-28 UNF |
1/428 UNF |
| R1 |
2.5 mm |
| Rα |
30 ° |
| Basic dynamic load rating - C |
12.7 kN |
| Basic static load rating - C0 |
6.6 kN |
| Fatigue load limit - Pu |
0.28 kN |
| Limiting speed with shaft tolerance h6 |
8500 r/min |
| Mass bearing unit |
0.91 kg |
| Grub (set) screw - G2 - 1/4-28 UNF |
1/428 UNF |
| Hexagonal key size for grub screw - H |
3.175 mm |
| Recommended tightening torque for grub screw |
4 N·m |
| Category |
Bearings |
| Inventory |
0.0 |
| Minimum Buy Quantity |
N/A |
| UNSPSC |
31171533 |
| Product Group |
M06110 |
| Housing material |
Cast iron |
| B4 |
4.5 mm |
| N |
19 mm |
| RG |
1/4-28 UNF |
| Rα |
30 ° |
| GN |
1/4-28 SAE-LT |
| Basic dynamic load rating C |
12.7 kN |
| Basic static load rating C0 |
6.55 kN |
| Fatigue load limit Pu |
0.28 kN |
| Grub (set) screw G2 |
1/4-28 UNF |
| Hexagonal key size for grub screw N |
3.175 mm |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |