TIMKEN 399A-90102 Tapered Roller Bearing Assemblies
| da: |
80.963 mm |
| Da: |
160 mm |
| Ca: |
49.809 mm |
| A1: |
98.425 mm |
| A2: |
206.375 mm |
| S: |
4.763 mm |
| ba: |
40.481 mm |
| H: |
196.85 mm |
| PDF |
|
Product Details
| da |
80.963 mm |
| Da |
160 mm |
| Ca |
49.809 mm |
| A1 |
98.425 mm |
| A2 |
206.375 mm |
| S |
4.763 mm |
| ba |
40.481 mm |
| H |
196.85 mm |
| H1 |
101.6 mm |
| H2 |
41.275 mm |
| L |
349.25 mm |
| R1 |
60.325 mm |
| R2 |
27.781 mm |
| RG |
3/8 NPT |
| PG |
1/8 NPT |
| h |
38.1 mm |
| Housing |
SSAFS 518 |
| Stabilizing ring |
SR-18-15 |
| Taconite seal |
TER 188 |
| End plug (suffix Y) |
EPR 11 |
| Max. speed for Taconite seal |
950 r/min |
| P60° |
141 kN |
| P90° |
84.5 kN |
| P120° |
53.4 kN |
| P150° |
48 kN |
| P180° |
58.7 kN |
| Pa |
10.9 kN |
| Mass pillow block |
31.3 kg |
| Cap bolt |
1/2-13 UNC |
| Cap bolt recommended tightening torque |
149.1 N·m |
| Cap bolt, SAE grade |
8 |
| Initial grease fill |
141.75 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |