Rolling Bearings For Steel Mills NSKLM765149D-110-110D
| da: |
147.637 mm |
| Da: |
259.999 mm |
| Ca: |
86.614 mm |
| A1: |
149.225 mm |
| A2: |
193.675 mm |
| ba: |
64.294 mm |
| H: |
298.45 mm |
| H1: |
152.4 mm |
Product Details
| da |
147.637 mm |
| Da |
259.999 mm |
| Ca |
86.614 mm |
| A1 |
149.225 mm |
| A2 |
193.675 mm |
| ba |
64.294 mm |
| H |
298.45 mm |
| H1 |
152.4 mm |
| H2 |
60.325 mm |
| J min. |
406.4 mm |
| J max. |
434.975 mm |
| J1 |
85.725 mm |
| L |
511.175 mm |
| N1 |
28.575 mm |
| R1 |
87.313 mm |
| R2 |
38.1 mm |
| RG |
3/4 NPT |
| PG |
1/4 NPT |
| h |
44.45 mm |
| Housing |
SAFS 034 KA |
| Stabilizing ring |
2 x SR-0-24 |
| Labyrinth ring |
2 x LOR 138 |
| End plug (suffix Y) |
EPR 18 |
| Bearing limiting speed |
2800 r/min |
| P60° |
301 kN |
| P90° |
180 kN |
| P120° |
116 kN |
| P150° |
105 kN |
| P180° |
127 kN |
| Pa |
34 kN |
| Mass pillow block |
87.5 kg |
| Cap bolt |
7/8-9 UNC |
| Cap bolt recommended tightening torque |
813.5 N·m |
| Cap bolt, SAE grade |
8 |
| Eye bolt |
2 x 3/8-16 UNC |
| Appropriate attachment bolt size G |
1 in |
| Initial grease fill |
481.95 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |