SKF NA 6908/W64 Roller Bearings
| da: | 254 mm |
| Da: | 419.999 mm |
| Ca: | 147.803 mm |
| A1: | 228.6 mm |
| A2: | 379.413 mm |
| ba: | 100.806 mm |
| H: | 495.3 mm |
| H1: | 250.825 mm |
| PDF |
|
Product Details
| da | 254 mm |
| Da | 419.999 mm |
| Ca | 147.803 mm |
| A1 | 228.6 mm |
| A2 | 379.413 mm |
| ba | 100.806 mm |
| H | 495.3 mm |
| H1 | 250.825 mm |
| H2 | 101.6 mm |
| J min. | 666.75 mm |
| J max. | 749.3 mm |
| J1 | 139.7 mm |
| L | 869.95 mm |
| N1 | 41.275 mm |
| R1 | 163.512 mm |
| R2 | 50.8 mm |
| RG | 1 NPT |
| PG | 1/4 NPT |
| h | 73.025 mm |
| Housing | SAFS 056 KAUB |
| Stabilizing ring | 2 x A8819 |
| Taconite seal | TER 568 |
| End plug (suffix Y) | X-5217-2 |
| Max. speed for Taconite seal | 310 r/min |
| P60° | 669 kN |
| P90° | 400 kN |
| P120° | 249 kN |
| P150° | 222 kN |
| P180° | 267 kN |
| Pa | 89 kN |
| Mass pillow block | 324 kg |
| Cap bolt | 4 x 1 1/2-6 UNC |
| Cap bolt recommended tightening torque | 4284.4 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 1/2-13 UNC |
| Appropriate attachment bolt size G | 1.5 in |
| Initial grease fill | 3515.4 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
