HC6322 Ball Bearings 2018 top 10
| da: | 69.85 mm |
| Da: | 140 mm |
| Ca: | 42.799 mm |
| A1: | 88.9 mm |
| A2: | 209.55 mm |
| ba: | 30.163 mm |
| H: | 169.863 mm |
| H1: | 88.9 mm |
Product Details
| da | 69.85 mm |
| Da | 140 mm |
| Ca | 42.799 mm |
| A1 | 88.9 mm |
| A2 | 209.55 mm |
| ba | 30.163 mm |
| H | 169.863 mm |
| H1 | 88.9 mm |
| H2 | 31.75 mm |
| J min. | 244.475 mm |
| J max. | 279.4 mm |
| J1 | 53.975 mm |
| L | 330.2 mm |
| N1 | 19.05 mm |
| R1 | 53.181 mm |
| R2 | 21.431 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 33.337 mm |
| Housing | FSAF 516 |
| Stabilizing ring | 2 x SR-1616 |
| Taconite seal | TER 45 |
| End plug (suffix Y) | EPR 8 |
| Max. speed for Taconite seal | 1150 r/min |
| P60° | 60.5 kN |
| P90° | 36 kN |
| P120° | 21.8 kN |
| P150° | 19.6 kN |
| P180° | 23.1 kN |
| Pa | 6.23 kN |
| Mass pillow block | 16.8 kg |
| Cap bolt | 2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque | 149.1 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.625 in |
| Initial grease fill | 175.77 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
