NTN 71932HVDUJ74 Precision Ball Bearings
| da: | 101.6 mm |
| Da: | 200 mm |
| Ca: | 62.789 mm |
| A1: | 120.65 mm |
| A2: | 231.775 mm |
| S: | 4.763 mm |
| ba: | 50.006 mm |
| H: | 239.316 mm |
Product Details
| da | 101.6 mm |
| Da | 200 mm |
| Ca | 62.789 mm |
| A1 | 120.65 mm |
| A2 | 231.775 mm |
| S | 4.763 mm |
| ba | 50.006 mm |
| H | 239.316 mm |
| H1 | 125.425 mm |
| H2 | 50.8 mm |
| J min. | 320.675 mm |
| J max. | 368.3 mm |
| J1 | 69.85 mm |
| L | 419.1 mm |
| N1 | 22.225 mm |
| R1 | 67.866 mm |
| R2 | 31.75 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 45.244 mm |
| Housing | SAF 522 |
| Stabilizing ring | SR-22-19 |
| Taconite seal | TER 110 |
| End plug (suffix Y) | EPR 13 |
| Max. speed for Taconite seal | 775 r/min |
| P60° | 149 kN |
| P90° | 89 kN |
| P120° | 55.6 kN |
| P150° | 50.7 kN |
| P180° | 60.9 kN |
| Pa | 17.3 kN |
| Mass pillow block | 33.1 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 203.4 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 232.47 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
