FAG Radial insert ball Bearings - RAE35-XL-NPP-NR
| da: | 79.375 mm |
| Da: | 160 mm |
| Ca: | 49.809 mm |
| A1: | 98.425 mm |
| A2: | 206.375 mm |
| ba: | 34.925 mm |
| H: | 192.484 mm |
| H1: | 101.6 mm |
| PDF |
|
Product Details
| da | 79.375 mm |
| Da | 160 mm |
| Ca | 49.809 mm |
| A1 | 98.425 mm |
| A2 | 206.375 mm |
| ba | 34.925 mm |
| H | 192.484 mm |
| H1 | 101.6 mm |
| H2 | 41.275 mm |
| J min. | 260.35 mm |
| J max. | 298.45 mm |
| L | 349.25 mm |
| N1 | 22.225 mm |
| R1 | 60.325 mm |
| R2 | 27.781 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 38.1 mm |
| Housing | SAF 518 |
| Stabilizing ring | 2 x SR-1518 |
| Taconite seal | TER 187 |
| End plug (suffix Y) | EPR 11 |
| Max. speed for Taconite seal | 950 r/min |
| P60° | 121 kN |
| P90° | 72.5 kN |
| P120° | 45.4 kN |
| P150° | 40.5 kN |
| P180° | 49.8 kN |
| Pa | 8.1 kN |
| Mass pillow block | 21.3 kg |
| Cap bolt | 2 x 5/8-11 UNC |
| Cap bolt recommended tightening torque | 149.1 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 286.33 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
