FAG Cylindrical roller Bearings - NJ2318-E-XL-TVP2 + HJ2318-E
| da: | 111.125 mm |
| Da: | 230 mm |
| Ca: | 73.812 mm |
| A1: | 130.175 mm |
| A2: | 279.4 mm |
| S: | 4.763 mm |
| ba: | 57.944 mm |
| H: | 292.1 mm |
| PDF |
|
Product Details
| da | 111.125 mm |
| Da | 230 mm |
| Ca | 73.812 mm |
| A1 | 130.175 mm |
| A2 | 279.4 mm |
| S | 4.763 mm |
| ba | 57.944 mm |
| H | 292.1 mm |
| H1 | 152.4 mm |
| H2 | 60.325 mm |
| L | 466.725 mm |
| R1 | 79.375 mm |
| R2 | 36.513 mm |
| RG | 1/2 NPT |
| PG | 1/4 NPT |
| h | 60.325 mm |
| Housing | SSAFS 526 |
| Stabilizing ring | SR-26-0 |
| Taconite seal | TER 116 |
| End plug (suffix Y) | EPR 15 |
| Max. speed for Taconite seal | 700 r/min |
| P60° | 308 kN |
| P90° | 185 kN |
| P120° | 125 kN |
| P150° | 118 kN |
| P180° | 151 kN |
| Pa | 24.9 kN |
| Mass pillow block | 85.7 kg |
| Cap bolt | 3/4-10 UNC |
| Cap bolt recommended tightening torque | 515.2 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Initial grease fill | 382.73 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
