FAG Thrust washers - EGW28-E40-B
| da: | 130.175 mm |
| Da: | 269.999 mm |
| Ca: | 82.804 mm |
| A1: | 158.75 mm |
| A2: | 215.9 mm |
| S: | 4.763 mm |
| ba: | 65.088 mm |
| H: | 317.5 mm |
Product Details
| da | 130.175 mm |
| Da | 269.999 mm |
| Ca | 82.804 mm |
| A1 | 158.75 mm |
| A2 | 215.9 mm |
| S | 4.763 mm |
| ba | 65.088 mm |
| H | 317.5 mm |
| H1 | 160.35 mm |
| H2 | 63.5 mm |
| J min. | 431.8 mm |
| J max. | 463.55 mm |
| J1 | 95.25 mm |
| L | 539.75 mm |
| N1 | 28.575 mm |
| R1 | 95.25 mm |
| R2 | 39.688 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 50.8 mm |
| Housing | SAFS 530 |
| Stabilizing ring | SR-30-0 |
| Labyrinth ring | 2 x LOR 124 |
| PosiTrac Plus contact element | 2 x B10724-125 |
| End plug (suffix Y) | EPR 16 |
| Max. speed for PosiTrac Plus seal | 1075 r/min |
| P60° | 394 kN |
| P90° | 236 kN |
| P120° | 149 kN |
| P150° | 136 kN |
| P180° | 162 kN |
| Pa | 32.7 kN |
| Mass pillow block | 115 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 623.7 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
