SKF 86641 Oil Seals
| da: | 85.725 mm |
| Da: | 180 mm |
| Ca: | 55.804 mm |
| A1: | 111.125 mm |
| A2: | 224.638 mm |
| S: | 4.763 mm |
| ba: | 44.45 mm |
| H: | 222.25 mm |
Product Details
| da | 85.725 mm |
| Da | 180 mm |
| Ca | 55.804 mm |
| A1 | 111.125 mm |
| A2 | 224.638 mm |
| S | 4.763 mm |
| ba | 44.45 mm |
| H | 222.25 mm |
| H1 | 114.3 mm |
| H2 | 44.45 mm |
| L | 387.35 mm |
| R1 | 58.737 mm |
| R2 | 30.163 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 42.069 mm |
| Housing | SSAFS 520 |
| Stabilizing ring | SR-20-17 |
| Taconite seal | TER 101 |
| End plug (suffix Y) | EPR 12 |
| Max. speed for Taconite seal | 900 r/min |
| P60° | 141 kN |
| P90° | 84.5 kN |
| P120° | 52.5 kN |
| P150° | 48 kN |
| P180° | 57.4 kN |
| Pa | 13.8 kN |
| Mass pillow block | 21.8 kg |
| Cap bolt | 5/8-11 UNC |
| Cap bolt recommended tightening torque | 298.3 N·m |
| Cap bolt, SAE grade | 8 |
| Initial grease fill | 181.44 g |
