INA IR75X85X25-EGS Roller Bearings
| Bearing number: | TU 3/4 TF |
| Size (mm): | 19.05x34x13.5 |
| Bore Diameter (mm): | 19,05 |
| Outer Diameter (mm): | 34 |
| Width (mm): | 13,5 |
| d: | 19.05 mm |
| A: | 34 mm |
| A1: | 13.5 mm |
Product Details
| Bearing number | TU 3/4 TF |
| Size (mm) | 19.05x34x13.5 |
| Bore Diameter (mm) | 19,05 |
| Outer Diameter (mm) | 34 |
| Width (mm) | 13,5 |
| d | 19.05 mm |
| A | 34 mm |
| A1 | 13.5 mm |
| A2 | 25 mm |
| A5 | 18.5 mm |
| B | 31 mm |
| H | 19 mm |
| H1 | 76 mm |
| H2 | 54 mm |
| L | 97 mm |
| L1 | 62 mm |
| L2 | 10 mm |
| L3 | 54 mm |
| N1 | 16 mm |
| N2 | 32 mm |
| s1 | 18.3 mm |
| DN | 6.5 mm |
| SWN | 7 mm |
| GN - 1/4-28 SAE-LT | 1/428 SAELT |
| RG - 1/4-28 UNF | 1/428 UNF |
| R1 | 2.5 mm |
| Rα | 30 ° |
| Basic dynamic load rating - C | 12.7 kN |
| Basic static load rating - C0 | 6.6 kN |
| Fatigue load limit - Pu | 0.28 kN |
| Limiting speed with shaft tolerance h6 | 8500 r/min |
| Mass bearing unit | 0.91 kg |
| Grub (set) screw - G2 - 1/4-28 UNF | 1/428 UNF |
| Hexagonal key size for grub screw - H | 3.175 mm |
| Recommended tightening torque for grub screw | 4 N·m |
| Category | Bearings |
| Inventory | 0.0 |
| Minimum Buy Quantity | N/A |
| UNSPSC | 31171533 |
| Product Group | M06110 |
| Housing material | Cast iron |
| B4 | 4.5 mm |
| N | 19 mm |
| RG | 1/4-28 UNF |
| Rα | 30 ° |
| GN | 1/4-28 SAE-LT |
| Basic dynamic load rating C | 12.7 kN |
| Basic static load rating C0 | 6.55 kN |
| Fatigue load limit Pu | 0.28 kN |
| Grub (set) screw G2 | 1/4-28 UNF |
| Hexagonal key size for grub screw N | 3.175 mm |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
