TIMKEN 399A-90102 Tapered Roller Bearing Assemblies
| da: | 80.963 mm |
| Da: | 160 mm |
| Ca: | 49.809 mm |
| A1: | 98.425 mm |
| A2: | 206.375 mm |
| S: | 4.763 mm |
| ba: | 40.481 mm |
| H: | 196.85 mm |
| PDF |
|
Product Details
| da | 80.963 mm |
| Da | 160 mm |
| Ca | 49.809 mm |
| A1 | 98.425 mm |
| A2 | 206.375 mm |
| S | 4.763 mm |
| ba | 40.481 mm |
| H | 196.85 mm |
| H1 | 101.6 mm |
| H2 | 41.275 mm |
| L | 349.25 mm |
| R1 | 60.325 mm |
| R2 | 27.781 mm |
| RG | 3/8 NPT |
| PG | 1/8 NPT |
| h | 38.1 mm |
| Housing | SSAFS 518 |
| Stabilizing ring | SR-18-15 |
| Taconite seal | TER 188 |
| End plug (suffix Y) | EPR 11 |
| Max. speed for Taconite seal | 950 r/min |
| P60° | 141 kN |
| P90° | 84.5 kN |
| P120° | 53.4 kN |
| P150° | 48 kN |
| P180° | 58.7 kN |
| Pa | 10.9 kN |
| Mass pillow block | 31.3 kg |
| Cap bolt | 1/2-13 UNC |
| Cap bolt recommended tightening torque | 149.1 N·m |
| Cap bolt, SAE grade | 8 |
| Initial grease fill | 141.75 g |
Company Profile
| Worktime |
9.00--18.00 |
| Phone |
0065-31591338 |
| Fax |
0065-31591338 |
